Cadet пишет:
Привет
Как глазику чествительность повысить? Или понизить?
Плег работает с большими задрежками постоянно детектит движение
Основной параметр чувствительности это п. 1 (по умолчанию "10", максимум (ниже - чувствительнее) - "8".
1. MOTION SENSOR’S SENSITIVITY
The lower the value, the more sensitive the PIR sensor.
Available settings: 8 - 255
Default setting: 10
Parameter size: 1 [byte]
Если не поможет - осторожно играемся с п. 3 и п.4
3. PIR sensor’s “PULSE COUNTER”
Sets the number of moves required for the PIR sensor to report
motion. The lower the value, the less sensitive the PIR sensor. It’s
not recommended to modify this parameter settings.
Available settings: 0 - 3
Formula to calculate the number of pulses: pulses = (value + 1)
Default setting: 1 (2 pulses)
Parameter size: 1 [byte]
4. PIR sensor’s “WINDOW TIME”
Period of time during which the number of moves set in parameter 3
must be detected in order for the PIR sensor to report motion. The
higher the value, the more sensitive the PIR sensor. It’s not
recommended to modify this parameter setting.
Available settings: 0 - 3
Formula to calculate the time: time
= 4 x (value + 1)
Default setting: 2 (12 seconds)
Parameter size: 1 [byte]