forum.micasaverde.com/index.php/topic,28842.30.html
support.getvera.com/customer/portal/articles/1840699-upgrade-from-ui5-on-veralite-vera-2-or-vera-3
Steps to transfer the z-wave network from Vera 3/lite to Vera Edge
The transfer process requires that you have your Vera 3/lite near your Vera Edge, at most 2 feet away. Once both units are powered on you?ll need to follow these steps :
1. Check and see if your Vera 3/Lite is the primary z-wave controller for your z-wave network, and this is indicated by the role which should be Master :
Role: Master SIS NO PRI: YES
If your unit has a different role contact our tech support team, and they?ll help you resolve it asap. For more details on this check out :
support.getvera.com/
2. Save a backup from your current Vera 3/lite unit, which we?ll use later on to transfer your settings to your Vera Edge. This can be done from Settings > Backup
3. Once the backup is saved we can go ahead and set your Vera 3/lite controller into transfer mode, and this can be done from Settings > Z-wave Settings > Advanced > Controller shift .
4. Next you?ll need to set your Vera Edge to copy your existing z-wave data, and this can be done from Settings > Z-wave Settings > Advanced > Copy Z-Wave network from a master controller.
5. This process will take some time based on the size of your z-wave network but once finished you should see all your z-wave devices on your Vera Edge.
6. Next we?ll have to restore the backup from your Vera 3/lite controller, which we?ve saved on step 1. This can be done by simply dragging the backup on the ?Upload? section from Settings > Backup. (NOTE: Restore Z-wave Network needs to be UNCHECKED)
7. Once finished you should have your Vera edge with all your settings from the Vera 3/lite.
Note that this procedure will set your Vera 3/lite controller as a slave (secondary) z-wave controller to your Vera Edge, and will add one additional Scene Controller device on the dashboard.
8. It is recommended that you run a z-wave network healing session to ensure that all your devices will work without issues. For battery operated devices you might need to wake them up manually.