Корзина  (пустая) 0 руб.
Корзина  (пустая) 0 руб.
Корзина  (пустая) 0 руб.
Корзина  (пустая) 0 руб.

+7 495 204-27-80

Добро пожаловать, Гость
Логин: Пароль: Запомнить меня

ТЕМА: Z-Wave.Me Floor Thermostat и Home Assistant

Z-Wave.Me Floor Thermostat и Home Assistant 28 Дек 2019 14:17 #27676

  • allmoney.ws
  • allmoney.ws аватар
  • Вне сайта
  • Гуру
  • Сообщений: 101
  • Спасибо получено: 8
  • Репутация: 0
Имеется Регулятор тёплого пола Z-Wave.Me Floor Thermostat.
В Home Assistant регулятор добавлен так:
<Node id="6" name="" location="" basic="4" generic="8" specific="6" type="General Thermostat V2" listening="true" frequentListening="false" beaming="true" routing="true" max_baud_rate="40000" version="4" query_stage="Complete">
		<Manufacturer id="115" name="Z-Wave.Me">
			<Product type="24" id="1" name="Floor Thermostat" />
		</Manufacturer>
		<CommandClasses>
			<CommandClass id="32" name="COMMAND_CLASS_BASIC" version="1" request_flags="4" innif="true" mapping="64">
				<Instance index="1" />
			</CommandClass>
			<CommandClass id="49" name="COMMAND_CLASS_SENSOR_MULTILEVEL" version="4" innif="true">
				<Instance index="1" />
				<Value type="decimal" genre="user" instance="1" index="1" label="Temperature" units="C" read_only="true" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="0" value="21.7" />
			</CommandClass>
			<CommandClass id="64" name="COMMAND_CLASS_THERMOSTAT_MODE" version="2" innif="true">
				<Instance index="1" />
				<Value type="list" genre="user" instance="1" index="0" label="Mode" units="" read_only="false" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="0" vindex="0" size="1">
                <Item label="Off" value="0" />
					<Item label="Heat" value="1" />
					<Item label="Furnace" value="7" />
					<Item label="Heat Econ" value="11" />
				</Value>
				<SupportedModes>
                <Mode index="0" label="Off" />
					<Mode index="1" label="Heat" />
					<Mode index="7" label="Furnace" />
					<Mode index="11" label="Heat Econ" />
				</SupportedModes>
			</CommandClass>
			<CommandClass id="67" name="COMMAND_CLASS_THERMOSTAT_SETPOINT" version="2" request_flags="2" innif="true" base="1" typeInterpretation="B">
				<Instance index="1" />
				<Value type="decimal" genre="user" instance="1" index="1" label="Heating 1" units="C" read_only="false" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="0" value="0.0" />
				<Value type="decimal" genre="user" instance="1" index="7" label="Furnace" units="C" read_only="false" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="0" value="0.0" />
				<Value type="decimal" genre="user" instance="1" index="11" label="Heat Econ" units="C" read_only="false" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="0" value="0.0" />
			</CommandClass>
			<CommandClass id="112" name="COMMAND_CLASS_CONFIGURATION" version="1" request_flags="4" innif="true">
				<Instance index="1" />
			</CommandClass>
			<CommandClass id="114" name="COMMAND_CLASS_MANUFACTURER_SPECIFIC" version="1" request_flags="4" innif="true">
				<Instance index="1" />
			</CommandClass>
			<CommandClass id="117" name="COMMAND_CLASS_PROTECTION" version="1" request_flags="4" innif="true">
				<Instance index="1" />
				<Value type="list" genre="system" instance="1" index="0" label="Protection" units="" read_only="false" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="0" vindex="0" size="1">
					<Item label="Unprotected" value="0" />
					<Item label="Protection by Sequence" value="1" />
					<Item label="No Operation Possible" value="2" />
				</Value>
			</CommandClass>
			<CommandClass id="119" name="COMMAND_CLASS_NODE_NAMING" version="1" request_flags="4" innif="true">
				<Instance index="1" />
			</CommandClass>
			<CommandClass id="133" name="COMMAND_CLASS_ASSOCIATION" version="1" request_flags="4" innif="true">
				<Instance index="1" />
				<Associations num_groups="1">
					<Group index="1" max_associations="10" label="Group 1" auto="true">
						<Node id="1" />
					</Group>
				</Associations>
			</CommandClass>
			<CommandClass id="134" name="COMMAND_CLASS_VERSION" version="1" request_flags="4" innif="true">
				<Instance index="1" />
				<Value type="string" genre="system" instance="1" index="0" label="Library Version" units="" read_only="true" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="0" value="3" />
				<Value type="string" genre="system" instance="1" index="1" label="Protocol Version" units="" read_only="true" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="0" value="3.42" />
				<Value type="string" genre="system" instance="1" index="2" label="Application Version" units="" read_only="true" write_only="false" verify_changes="false" poll_intensity="0" min="0" max="0" value="1.01" />
			</CommandClass>
		</CommandClasses>
	</Node>

В инструкции есть параметры:
1.
2019-12-28_14-12-53.png

2.
2019-12-28_14-13-57.png


Подскажите, как в xml коде из Home Assistant задать Максимальную допустимую температуру 45 и Максимальную ширину коридора температур 1 градус?
Сейчас коридор похоже намного шире, даже не 1 градус, как написано в инструкции по умолчанию...

2019-12-28_14-17-04.png

Z-Wave.Me Floor Thermostat и Home Assistant 10 Янв 2020 17:25 #27728

  • allmoney.ws
  • allmoney.ws аватар
  • Вне сайта
  • Гуру
  • Сообщений: 101
  • Спасибо получено: 8
  • Репутация: 0
Неужели никто не разбирается? :(
Время создания страницы: 0.318 секунд